Thiết kế và Thi công Hệ thống Cơ Điện

TỔNG QUAN

Thiết Kế và Thi công
Hệ thống Cơ Điện


Hệ thống M&E (Mechanical and Electrical) hay hệ thống cơ điện là phần thêm vào để hoàn thiện một ngôi nhà. Hệ thống này được chia ra làm 2 phần chính là phần cơ và phần điện.

Phần cơ

Phần cơ trong công trình tập chung chủ yếu và hạng mục điều hòa và thông gó (được gọi với tên khác phổ biến là HVAC).

Các hạng mục khác như: Phòng cháy chữa cháy (Fire alarm and Fighting), Cấp thoát nước (Plumbing and Sanitary – P&S), cung cấp gas LPG và khí nén,…

Phần điện

Các hạng mục liên quan đến điện gồm: phân phối và cung cấp điện, hệ thống chiếu sáng (lighting), điều khiển (control system), điện nhẹ (Extra low voltage-ELV).

Khi nào nên thiết kế cơ điện?

Công việc thiết kế và thi công hệ thống cơ điện được làm song song với phần xây dựng thô và hoàn thiện công trình. Do đó, chủ đầu tư phải đảm bảo có trong tay bản vẽ thiết kế cơ điện cho công trình trước khi tiến hành các bước tiếp theo.

Hệ thống cơ điện chia ra làm hệ thống cơ và điện.

Trong đó, đối với hệ thống điện, I-ON cung cấp các dịch vụ tư vấn thiết kế sau:

– Thiết kế hệ thống điện động lực trong tòa nhà

– Giải pháp thiết kế chiếu sáng trong nhà, ngoài trời

– Thiết kế hệ thống điều khiển thông minh cho Tòa nhà.

– Thiết kế Hệ thống CCTV và hệ thống an ninh, hệ thống phát thanh và cảnh báo.

– Thiết kế Hệ thống dò và báo cháy.

– Thiết kế Hệ thống quản lý tòa nhà, quản lý thâm nhập tòa nhà.

– Thiết kế Lắp đặt hệ thống UPS.

– Thiết kế Hệ thống đường dây điện và trạm biến áp, thiết bị đóng cắt cao, trung và hạ thế.

– Thiết kế lắp đặt hệ thống máy phát điện và hệ thống trạm điện.

– Hệ thống chống sét.



Đối với kỹ thuật cơ, I-ON cung cấp các dịch vụ tư vấn thiết kế sau:

– Thiết kế hệ thống thông gió, hệ thống điều hòa không khí.

– Thiết kế hệ thống hồi nhiệt

– Thiết kế hệ thống nước ngưng, hệ thống bơm nước nóng –lạnh

– Thiết kế hệ thống quản lý năng lượng

– Thiết kế hệ thống chống và báo cháy.

– Thiết kế hệ thống khí nén.

– Thiết kế thiết bị vệ sinh, bao gồm hệ thống nước thải, cấp thoát nước.

Nhiệm vụ của công ty tư vấn thiết kế cơ điện công trình uy tín

– Tư vấn theo yêu cầu của khách hàng (Concept design)

– Tư vấn, thiết kế kỹ thuật cơ điện (technical design)

– Tư vấn, thiết kế kỹ thuật thi công cơ điện (shop drawing design/ detail design)

– Tư vấn ngân sách và gọi nhà thầu (Budget estimation)

– Tư vấn giám sát thi công hệ thống cơ điện (M&E site supervision)

Quy trình thiết kế cơ điện:

– Thiết kế ý tưởng, thiết kế cơ sở, thiết kế kỹ thuật, thiết kế thi công

– Thẩm tra thiết kế

– Bóc tách khối lượng và lập khái toán

– Các dịch vụ về thầu (Lập hồ sơ mời thầu, đánh giá hồ sơ dự thầu)

– Thiết kế và thực hiện các thủ tục xin phép để thi công.

Đội ngũ kỹ sư giỏi, trình độ cao, nhiệt huyết với hơn 11 năm kinh nghiệm của I-ON đã thực hiện thiết kế cho rất nhiều dự án cơ điện lớn nhỏ. Sự tin tưởng, những lời khen tặng từ chủ đầu tư đã tạo động lực để I-ON thực hiên nhiều công trình hơn nữa.


ION_Thiết kế và Thi công Cơ điện

Tiêu chuẩn thiết kế Hệ thống Cơ điện


  1. TIÊU CHUẨN THIẾT KẾ VÀ LẮP ĐẶT HỆ THỐNG ĐIỆN CÔNG TRÌNH

1.1 Quy chuẩn, tiêu chuẩn:

QCVN 12:2014 National technical regulation on electrical systems of houses and buildings

QCVN 05:2008/BXD Housing and public works – life and health safety

QCVN QTD-08:2010/BCT Technical regulation on low voltage electricity

Regulations on electrical equipment 2006

TCVN 9206:2012 (replacing TCVN 27:1995) Installation of electrical equipment in houses and public works – Design standards

TCVN 9207:2012 (replacing TCVN 25: 1995) Laying electrical lines in houses and public works – Design standards

TCVN 9208:2012 Installation of cables and wires in industrial buildings

TCVN 394: 2007 Standard for design and installation of electrical equipment in construction works, electrical safety section

TCVN 7447-1:2004 Electrical installations of buildings – Part 1: Basic principles, assessment of general characteristics, definitions

TCVN 7447-5-51:2004 Electrical installation systems of buildings – Part 5-51: Selection and installation of electrical equipment – ​​General rules

TCVN 7447-5-53:2005 Electrical installation systems of buildings – Part 5-53: Selection and installation of electrical equipment – ​​Isolation, switching and control

TCVN 7447-5-54:2005 Electrical installation systems of buildings – Part 5-55: Selection and installation of electrical equipment – ​​Earthing arrangements, protective conductors and protective bonding wires

1.2 Quy phạm trang bị điện:

11 BC -18-2006 Code of Electrical Equipment – ​​Part I: General Regulations

11 BC -19-2006 Code of electrical equipment – ​​Part II: Power transmission system

11 TCN -20-2006 Regulation on electrical equipment – ​​Part III: Distribution equipment and substations

11 BC -21-2006 Code of Electrical Equipment – ​​Part IV: Protection and Automation

  1. TIÊU CHUẨN THIẾT KẾ VÀ LẮP ĐẶT CHIẾU SÁNG CÔNG TRÌNH

TCVN 7114-1:2008 – Lighting in the workplace – part 1: indoors

TCVN 7114-3:2008 – Workplace lighting – Part 3: Safety and protective lighting requirements in outdoor workplaces.

TCVN 29:1991 – Natural lighting in civil works – Design standards

TCVN 259:2001 – Design standards for artificial lighting of roads, streets and urban squares

TCVN 333:2005 – Artificial lighting outside public works and urban infrastructure engineering – Design standards

  1. TIÊU CHUẨN THIẾT KẾ VÀ LẮP ĐẶT HỆ THỐNG ĐIỆN NHẸ

QCVN 33:2011/BTTTT National technical regulation on installation of telecommunications peripheral cable networks

TCVN 7189:2009 Information technology equipment – ​​radio frequency characteristics – limits and measuring method

TCVN 175:2005 Maximum permissible noise level in public works – design standards

TCN 68-135:2001 Lightning protection for telecommunications works – technical requirements

TCVN 4511: 1988 Sound studio – Technical requirements for construction sound

TCN 68_167:1997 Device to prevent overvoltage and overcurrent due to the influence of lightning and power transmission lines

TCN 68_174:1998 Lightning protection and grounding scope for telecommunications works

TCVN 10251:2013 Design and installation of information cabling systems in buildings- Technical requirements

TCVN 9373:2012 Equipment in television signal cable distribution systems- Requirements for electromagnetic compatibility

TCVN 10296:2014 Coaxial cables in cable television signal distribution networks – Technical requirements and test methods

TCVN 8238:2009 Telecommunication networks – Metallic communication cables used in local telephone networks

TCVN 8698:2011 Telecommunication networks – Information copper fiber cables CAT.5, CAT.5E –Technical requirements

TCVN 8697:2011 Telecommunication networks – Copper fiber cables to subscriber houses – Technical requirements

TCVN 8696:2011 Telecommunication networks – Fiber optic cables to subscriber houses – Technical requirements

TCVN 8665:2011 Optical fibers for telecommunications networks – General technical requirements

TCVN 8700:2011 Sewers, tanks, tunnels, pits, technical trenches and telecommunication cable terminals – Technical requirements

TCVN 8699:2011 Telecommunication networks – Plastic pipes for underground cables – Technical requirements

TCVN 8235:2009 Electromagnetic compatibility (EMC) – Telecommunications network equipment – ​​Electromagnetic compatibility requirements


  1. TIÊU CHUẨN THIẾT KẾ VÀ LẮP ĐẶT THIẾT BỊ THÔNG GIÓ, ĐIỀU HOÀ KHÔNG KHÍ

QCVN 09:2005 Energy efficient buildings

QCVN 09: 2013 Energy efficient buildings

TCVN 5687: 2010 Ventilation, air conditioning, heating – Design standards

TCVN 306: 2004 Housing and public buildings-microclimate parameters

TCVN 7830:2012 Ductless air conditioners. Energy efficiency.

TCVN 232:1999 Ventilation, air conditioning and refrigeration systems – Fabrication, installation and acceptance

  1. TIÊU CHUẨN THIẾT KẾ CẤP THOÁT NƯỚC CÔNG TRÌNH

TCVN 33: 2006 Water supply – Pipeline networks and works – Design standards

QCVN 14:2008/BTNMT National technical regulation on domestic wastewater

TCVN 4513:1988 Internal water supply – Design standards

TCVN 4519-1988 Drainage system inside houses and buildings – scope of construction and acceptance

TCVN 4474:1987 Internal drainage – Design standards

TCVN 51: 2008 Drainage – external networks and buildings – design standards

Regulations on water supply and drainage systems in houses and works, promulgated together with Decision No. 47/1999/QD-BXD, dated December 21, 1999

TCVN 4037:2012 Water supply – Terms and definitions

TCVN 4038:2012 Drainage – Terms and definitions

TCVN 7957:2008 Drainage – External networks and buildings -Design standards.

  1. TIÊU CHUẨN THIẾT KẾ PHÒNG CHÁY CHỮA CHÁY

The Law on Fire Prevention and Fighting was passed by the National Assembly of the Socialist Republic of Vietnam, term X, at its 9th session on June 29, 2001.

TCVN 3256:1989 Fire safety- General requirements.

TCVN 3255:1986 Explosion safety – General requirements.

TCVN 4878:2009 Fire prevention – Classification of fire.

TCVN 2622:1995 Fire prevention and fighting for houses and works – Design requirements.

TCVN 5738:2001 – Fire alarm system with technical requirements

QCVN 06:2010/BXD – National technical regulation on fire safety for houses and buildings

TCVN 2622:1995 – Fire prevention and fighting for houses and buildings – design requirements

TCVN 3890:2009 – Fire prevention & fighting equipment for houses and buildings – equipment, layout, inspection and maintenance

TCVN 6160 :1996 – Fire protection for high-rise buildings – design requirements

TCVN 6161:1996 – Fire protection for homes and commercial centers

TCVN 7336:2003 – Fire fighting system – Automatic sprinkler system – design & installation requirements

  1. TIÊU CHUẨN THIẾT KẾ HỆ THỐNG CHỐNG SÉT VÀ TIẾP ĐỊA

TCVN 9385: 2012 (thay thế 46-2007) – Chống sét cho công trình xây dựng, hướng dẫn thiết kế kiểm tra và bảo trì hệ thống.

TCVN 9358: 2012 (thay thế 319-2004) – Lắp đặt hệ thống nối đất thiết bị cho các công trình công nghiệp – Yêu cầu chung.

  1. CÁC TIÊU CHUẨN KHÁC

QCVN 08:2009/BXD Quy chuẩn kỹ thuật quốc gia về công trình ngầm đô thị – Phần 2: Gara ôtô

TCVN 4605:1988 Kỹ thuật nhiệt. Kết cấu ngăn che – Tiêu chuẩn thiết kế.

Tham khảo các tiêu chuẩn nước ngoài như: ASHRAE, JIS, ARI, BS, AS/NZS…







I-ON M&E JSC

Văn phòng

Phòng 102, Tòa nhà Phú Mã Dương,
Số 85 Hoàng Văn Thái, Phường Tân Phú,
Quận 7, Tp. Hồ Chí Minh
(+84) 866 573 088

www.ion-me.com.vn

ion@ion-me.com.vn

Theo dõi Chúng tôi